PROMISE FastTrak TX4310 (PCI) SATA 3Gb, s RAID (0, 1, 5, 10, JBOD), 4x HDD KIT

Disk Array Features
Device Support Storage capacity up to 4.0 terabytes (four 500GB drives x 2
controller system)
4 SATA 3Gb/s ports for up to 4 Serial ATA devices
Supported RAID Levels RAID 0/1/5/10/JBOD
RAID 0 – Data striped across 2-4 drives for increased performance
RAID 1 – Mirrored pairs of drives for data protection
RAID 5 – Striped data + rotate parity
RAID 10 – Data mirrored then striped across 4 drives, ultimate data protection and performance (provides a level of double drive failure protection)
Data Transfer Rate Up to 266 MB per second (Performance may vary depending upon drive make, motherboard and PCI bus speed)
RAID Features Data handling optimizations include elevator seek and load balancing
Supports hot-swap of failed drives
Offers transparent data recovery and rebuilds drive in background
Online Capacity Expansion - add capacity on the fly
RAID Level Migration - change array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use Quick initialization
Arrays are bootable with built-in BIOS
Upgrades your current disk drive to a RAID array by migrating existing data to the array
System Management
Management Tools WebPAM (Web-based Promise Array Management) local and remote monitoring for Windows and Linux:
–monitors status of arrays, hard drives, and controller via TCP/IP
–warns of drive failure
–allows rebuilds of mirrored arrays
–synchronizes data in fault-tolerant arrays
–email notification for array events
–S.M.A.R.T.-compatible status reporting
Notification Email, audible, and visible alarms
Operating System Support Microsoft Windows XP, Windows Server 2003, Windows 2000
RedHat Linux; SuSE Linux
Linux partial open source code
Hardware
Serial ATA 3G Support Supports Serial ATA II: 3Gb/s Specification
Supports Serial ATA II: Extensions to Serial ATA 1.0a, including
–Native Command Queuing
–Staggered Drive Spin-Up
–HDD Activity Indication
Multiple Controllers Support Up to 2 controllers in the same system are supported
PCI Support 32-bit / 66MHz PCI interface compliant to PCI Rev 2.3
(Backward-compatible with PCI 33MHz)
HBA Features Low-profile form factor (HW) 2.00 x 4.69 inches (51 x 119 mm)
BIOS flash upgradeable for future updates
Built in SMBus connector for Promise SuperSwap 4100/1100
Supports ACPI (S1, S3, S4)
Physical and Environmental Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Built in SMBus connector for Promise SuperSwap 4100/1100
Cables in kit 4 x 25" (650mm) Serial ATA Cables
Agency Certifications UL, cUL, CE, FCC Class B, BSMI, MIC, C-Tick, VCCI
Limited Warranty 3 Years