Popis produktu:
Disk Array Features
Four SAS/SATA ports for up to four SAS/
SATA 3Gb/s devices
Supported RAID 0/1/5/10/JBOD
RAID 0 – Data striped across 2-4 drives for increased performance
RAID 1 – Mirrored pairs of drives for data protection
RAID 5 – Striped data + rotate parity
RAID 10 – Data mirrored then striped across 4 drives, ultimate data protection
and performance (provides a level of double drive failure protection)
JBOD – Just a Bunch Of Disks (no protection)
Data Transfer Rate Up to 250 MB per second (Performance may vary depending
upon drive make, motherboard and PCI Express bus speed)
RAID Features - Support hot-swap of failed drives
Offers transparent data recovery and rebuilds drive in background
Online Capacity Expansion - adds capacity on the fly
RAID Level Migration - changes array levels on the fly
MetaData on Disk (MDD) for drive roaming
Easy to Use Fast initialization
Arrays are bootable with built-in BIOS
Upgrades your current disk drive to a RAID array by migrating
existing data to the array
System Management
Management Tools WebPAM (Web-based Promise Array Management) local and remote monitoring
for Windows and Linux — monitors status of arrays, hard drives, and controller
via TCP/IP, warns of drive failure, allows rebuilds of mirrored arrays,
synchronizes data in fault-tolerant arrays, email notification for array events,
S.M.A.R.T.-compatible status reporting
Notification Email, audible, and visible alarms
Operating System Support Microsoft Windows Vista, 2000, XP, Windows Server 2003
RedHat Linux
SuSE Linux
Linux kernel 2.6 partial source code
Supports AMD64 and Intel EM64T
Hardware
SAS 3Gb/s Support Supports Serial Attached SCSI 1.1, including
• SAS 3Gb/s
• SSP protocol
Serial ATA 3Gb/s Support Supports Serial ATA Revision 2.6, including
• Native Command Queuing
• Staggered Drive Spin-Up
• HDD Activity Indication
PCI Express Support PCI Express x1 interface compliant to PCI Express Specification, Rev.1.0a
HBA Features Low-profile form factor
Flash up-gradable for future updates
Supports ACPI (S1, S3, S4)
Physical and Environmental Dimension (H x W): 2.70 x 4.43 inches (68.5 x 112.5 mm)
Operating temperature: 32 to 122°F (0 to 50°C)
Relative humidity: 5%-95% non-condensing
Agency Certifications UL, cUL, CE, FCC Class B, BSMI, VCCI, MIC, C-tick
Warranty Three years complete system limited warranty