Team SSD M.2 2TB MP33 NVMe (1800, 1500 MB, s)

SSD | MP33 M.2 PCIe Gen3.0 x4 with NVMe - 2 TB
TEAMGROUP MP33 M.2 PCIe Solid State Drive uses high speed PCIe Gen3 x4 interface and complies with the NVMe 1.3 standard. With 3D nand flash memory, the transfer speed is 3 times faster than SATA III. Suitable for players who have needs in speed, and it is the top choice when it comes to upgrading PC/laptop.
Using new generation of 3D flash memory
PCIe interface – Supports latest NVMe 1.3 protocol.
M.2 2280 specification: Supports the next-generation platforms of Intel and AMD. Suitable for both desktop and notebook.
Supports SLC Caching technology.
3-year product warranty. Free technical support service
TECHNICAL SPECIFICATIONS
Interface
PCIe 3.0 x4 with NVMe 1.3
Capacity
2TB
Voltage
DC +3.3V
Operation Temperature
0°C ~ 70°C
Storage Temperature
-40°C ~ 85°C
Terabyte Written
2TB / >1000TB
Performance
Crystal Disk Mark:
2TB Read/Write: up to 1,800/1500 MB/s
Weight
6g
Dimension
80(L) x 22(W) x 3.8(H) mm
Humidity
RH 90% under 40°C (operational)
Vibration
80Hz~2,000Hz/20G
Shock
1,500G/0.5ms
MTBF
1,500,000 hours
Operating System
System Requirements:
• Windows 10 / 8.1 / 8 / 7
• Linux 2.6.33 or later
Warranty
3-year limited warranty
Note
[1] 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
[2] Definition and conditions of TBW (Terabytes Written)are based on JEDEC standard
[3] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.
[4] PCIe SSD works best under WIN8.1 and WIN10 operating system. Windows Operating Systems earlier than Windows 8.1 does not support NVMe Driver natively. Users will need to install
NVMe Driver prior installing the SSD